Interval, Timeout, Priority – Alcatel-Lucent 7750 SR OS User Manual
Page 391

Filter Policies
7750 SR OS Router Configuration Guide
Page 391
hold-down seconds — The amount of time, in seconds, that the system should be held down if any
of the test has marked it unreachable.
Values
0 — 86400
interval
Syntax
interval seconds
no interval
Context
config>filter>destination>ping-test
config>filter>destination>snmp-test
config>filter>destination>url-test
Description
This command specifies the amount of time, in seconds, between consecutive requests sent to the far
end host.
Default
1
Parameters
seconds — Specifies the amount of time, in seconds, between consecutive requests sent to the far end
host.
Values
1 — 60
timeout
Syntax
timeout seconds
no timeout
Context
config>filter>destination>snmp-test
config>filter>destination>url-test
Description
Specifies the amount of time, in seconds, that is allowed for receiving a response from the far-end
host. If a reply is not received within this time the far-end host is considered unresponsive.
Default
1
Parameters
seconds — Specifies the amount of time, in seconds, that is allowed for receiving a response from the
far end host.
Values
1 — 60
priority
Syntax
priority priority
no priority
Context
config>filter>destination