List of commands, Table 18 – Alcatel-Lucent 7750 SR OS User Manual
Page 302
List of Commands
Page 302
7750 SR OS Router Configuration Guide
List of Commands
lists all the filter configuration commands indicating the configuration level at which
each command is implemented with a short command description. The filter policy command list
is organized in the following task-oriented manner:
•
Configure an IP filter policy
→
Configure an IP filter policy entry
→
Configure IP filter entry matching criteria
•
Configure an IPv6 filter policy
→
Configure an IPv6 filter policy entry
→
Configure an IPv6 filter entry matching criteria
•
Configure a MAC filter policy entry
→
Configure MAC filter entry matching criteria
•
Configure a redirect policy
Table 18: CLI Commands to Configure Filter Policies Parameters
Command
Description Page
Configure an IP filter policy
config>filter
ip-filter
Creates an IP filter policy.
default-action
The default action specifies the action to be applied to packets when the
packets do not match the specified criteria in any of the IP filter entries of
the filter.
description
A text string describing the filter policy.
renum
Renumbers existing filter entries to properly sequence filter entries.
scope
Configures the filter policy scope as exclusive or template. An exclusive
policy can only be applied to a single entity (SAP or network port). A
template policy can be applied to multiple SAPs or network ports.
Configure an IP filter policy entry
config>filter>ip-filter
entry
Creates a filter entry and identifies a group of match criteria and the
corresponding action.
action
Creates the drop or forward action associated with the match criteria. If
not specified, the filter policy entry is not taken into account.
description
A text string describing the entry.