Alcatel-Lucent 7750 SR OS - Manual (Page 328)

Common Configuration Tasks
Page 328 7750 SR OS Router Configuration Guide
Apply an IPv6 Interface
Use the following CLI syntax to apply an IPv6 filter policy to a network IP interface:
CLI Syntax: config>router# interface ip-int-name
egress
filter ipv6 ipv6-filter-id
ingress
filter ipv6 ipv6-filter-id
Example : config>router# interface ipv6-test
config>router>if# ingress filter ipv6 1
config>router>if# egress filter ipv6 1
config>router>if# ingress filter ip 2
config>router>if# egress filter ip 2
A:config>router>if# info
----------------------------------------------
port 1/1/1
ipv6
address 3FFE::101:101/120
exit
ingress
filter ip 2
filter ipv6 1
exit
egress
filter ip 2
filter ipv6 1
exit
----------------------------------------------
A:config>router>if#