Alcatel-Lucent 7750 SR OS - Manual (Page 371)

Filter Policies
7750 SR OS Router Configuration Guide Page 371
match
Syntax match [next-header next-header]
no match
Context config>filter>ipv6-filter>entry
Description This command enables the context to enter match criteria for the filter entry. When the match criteria
have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context may consist of multiple match criteria, but multiple match statements cannot be
entered per entry.
The no form of the command removes the match criteria for the entry-id.
Parameters next-header — Specifies the IPv6 next header to match. Note that this parameter is analogous to the
protocol parameter used in IP-Filter match criteria.
Values [0 — 42 | 45 — 49 | 52 — 59 | 61— 255] — protocol numbers accepted in decimal,
hexidecimal, or binary - DHB
keywords: none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp, igmp, igp,
ip, ipv6, ipv6-icmp, ipv6-no-nxt, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp,
rsvp, stp, tcp, udp, vrrp
* — udp/tcp wildcard
crudp 127 Combat Radio User Datagram
Protocol Protocol ID Description