Alcatel-Lucent 7750 SR OS - Manual (Page 101)

IP Router Configuration
7750 SR OS Router Configuration Guide Page 101
Syntax port port-name
no port
Context config>router>interface ip-int-name
Description This command creates an association with a logical IP interface and a physical port.
An interface can also be associated with the system (loopback address).
The command returns an error if the interface is already associated with another port or the system. In
this case, the association must be deleted before the command is re-attempted.
The no form of the command deletes the association with the port. The no form of this command can
only be performed when the interface is administratively down.
Default No port is associated with the IP interface.
Parameters port-id — The physical port identifier to associate with the IP interface.
Values port-name: port-id[:encap-val]
port-id
slot/mda/port[.channel]
encap-val 0 for null
0 — 4094 for dot1q
aps-id aps-group-id[.channel]
aps
keyword
group-id 1 — 64
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
ccag-id ccag-id. path-id[cc-type]
ccag keyword
id
1 — 8
path-id a, b
cc-type .sap-net, .net-sap
lag-id lag-id
lag keyword
id
1 — 200
The port-id can be in one of the following forms:
Ethernet Interfaces
If the card in the slot has MDAs, port-id is in the slot_number/MDA_number/port_number
format; for example, 1/1/3 specifies port 3 of the MDA installed in MDA slot 1on the card
installed in chassis slot 1.
SONET/SDH interfaces
When the port-id represents a POS interface, the port-id must include the channel-id. The POS
interface must be configured as a network port.
proxy-arp-policy