American Dryer Corp. ADG-385 - Manual (Page 52)

48
A. Data Label
Contact American Dryer Corporation
When contacting American Dryer Corporation certain information is required to insure proper
services/parts information from American Dryer. This information is on the data label located on the
control door. When contacting American Dryer please have to model number and serial number handy.
THE DATA LABEL
1. MODEL NUMBER - The models number is an ADC number which describes the size of the dryer
and the type of heat (gas or steam).
2. SERIAL NUMBER - The serial number allows ADC to gather information on your particular dryer.
3. MANUFACTURING CODE NUMBER - The manufacturing code number is a number issued by
ADC which describes ALL possible options on your
particular model.
4. TYPE OF HEAT - Describes the type of heat; gas (natural or L.P.) or steam or electric.
5. HEAT INPUT - (For gas dryers) describes the heat input in British thermal units.
6. ELECTRIC SERVICE - Describes the electric service for your particular models.
7. GAS MANIFOLD PRESSURE - Describes the manifold pressure as taken at the gas valve pressure
tap. (see How To Use A Manometer)
SECTION VII
Technical Information