American Dryer Corp. ADG-385 - Manual (Page 25)

21
To Replace Burner Tubes
1. Discontinue power to dryer.
2. Close shut off valve in gas supply line.
3. Disconnect gas valve wiring.
4. Break union connection before gas valve.
5. Loosen and remove two (2) screws securing pipe bracket to the burner.
6. Remove gas valve / manifold assembly from the dryer.
7. Remove the screws securing the front flanges of the burner tubes to the burner rest.
8. Remove burner tubes by sliding them out.
9. Replace by reversing procedure.
WARNING: Test ALL connections for leaks by brushing on a soapy water solution.
NEVER TEST FOR LEAKS WITH A FLAME.