Bell & Gossett 10-001-278 XLS Integrated Pump Controller - Manual (Page 33)

33
Troubleshooting Email Send Failures
The following table gives the number codes associated with failures received after tapping
[SEND] to do a test-run of the email addresses and the SMTP:
Value Description
0 Success
1 Invalid format for parameter 1 (Subject)
2 Invalid format for parameter 2 (Message)
3 Invalid format for parameter 3 (To)
4 Wrong number of parameters
5 Start Socket error
6 Error getting host IP Address (i.e. invalid SMTP server)
7 Error connecting to SMTP server
8 Error sending HELO command (initialization)
9 Error sending MAIL command (sending FROM address)
10 Error sending RCPT command (sending TO address)
11 Error sending DATA (sending message)
SMTP Error Codes, Test Email Function
The following test can be used to check for access to the SMTP server:
• Open a command window as in checking for the IP address above.
• Use Telnet to attempt to connect to smtp.runbox.com on port 25 (or your email
servers name)