Goulds Pumps 3298 - IOM - Manual (Page 68)

Maintenance
b) Use a center punch to stake the impeller at the end of the key in order to hold the key in
place.
Figure 37: 3298 S, M, and L groups, SP3298, and V3298
3. Install the radial bearing into the impeller:
a) Lubricate the outside of the radial bearing.
b) Use the bearing installation tool to press the radial bearing (197B) into the impeller.
c) Support the impeller with the bearing press support tool.
d) Line up the keyway in the bearing with the key in the impeller.
Figure 38: XS group
66 3298 Family Installation, Operation, and Maintenance Manual