Goulds Pumps 3298 - IOM - Manual (Page 56)

Maintenance
Required tools
WARNING:
This pump contains extremely strong magnets. You must use non-magnetic tools and work surfaces.
Non-magnetic tools
• 9/16-inch and 3/4-inch socket wrench
• Non-metallic hammer
Tools
• Long T-handle hex wrench in size 3/16-inch
• 1/2-inch, 9/16-inch, and 3/4-inch sockets
• Socket wrench with a minimum extension of 4 in. (10 cm)
• Screw drivers
• Lip seal driver
• Hammer
• Three 5/16-inch x 2-inch hex capscrews
• Three 5/8-inch x 4-inch hex capscrews
Tool kits
You can use these available tool kits in order to ease the assembly and disassembly of these
pumps:
Group Kit number Optional tools
Tool number Description
XS
R298TK04 B03309A 1 x 1½-5 bearing spider installation driver
B04370A 1½ x2-6 bearing spider installation driver
B03310A Radial bearing installation tool
A06872A Bearing press support tool
S R298TK01 B02496A Bearing spider installation driver
B02497A Radial bearing installation tool
M R298TK02 B03147A Bearing spider installation driver
B03148A Bearing spider installation driver
B03149A Radial bearing installation tool
B03189A Magnet assembly/disassembly guide rods
L R298TK03 B03191A Bearing spider installation driver
B03175A Radial bearing installation tool
B03149A Radial bearing installation tool
B03189A Magnetic assembly/disassembly guide rods
54 3298 Family Installation, Operation, and Maintenance Manual