NOVUS TagTemp-USB - Manual (Page 4)

NOVUS AUTOMATION 4/5
5.2.2 Measures Table Window
To display measurements in a tabular form, press the icon Table
View:
Values are presented in a tabular form, listing the measurement time
and value.
Fig. 07 – Screenshot showing the measurement table
5.2.3 General information table
This window shows some information about the equipment whose
data were just read and its configuration. The screen can be
displayed by pressing the icon Parameter Viewing:
Fig. 08 – General information window
5.3 EXPORTING DATA
Logged data can be exported to different file formats, for further
analysis. To export, access File/Export or click the icon:
5.4 EXPORTING THE DATA REGISTERED
Battery Level: Indicates the level of battery voltage. When the
battery reaches a low level voltage, immediate replacement is
recommended to ensure that the equipment will be continue to
function properly.
Device Status: Summarizes the state of the device, including its
memory, and the occurrence of alarm events to the time of the
opening of the Diagnostic page.
6 BATTERY REPLACEMENT
Replace battery with Panasonic lithium battery Part
No. CR 2032 only.
Usage of another battery may present a risk of fire or
explosion.
Replacement procedure is described as follows:
• Remove the plastic cover.
Fig. 9
• With a small screwdriver, carefully remove the circuit board and
battery
Fig. 10
• Insert a new battery and reattach the electronic board in the
cabinet.
Fig. 11
• Carefully connect the USB connector into the housing with the
battery downward.
Fig.12