Sony SVR-3000 - Manual (Page 98)

91
Q u e s t i o n s A b o u t A u d i o / V i d e o
• Your TV may not be set to the correct input. Most TVs have an input button that says
either "TV/Video," "Input," or "Source." It may be on the TV or on the TV remote
control. Look at your TV and TV remote and try changing the input for your TV.
• If you have your recorder connected to a VCR, the VCR may not be set to the correct
input. Most VCRs have an input button that says either "TV/Video," "Input," or
"Source." It may be on the VCR or on the VCR remote control. Look at your VCR
and VCR remote and try changing the input for your VCR.
• Check to make sure all of the appropriate cables are firmly connected to your recorder,
television and other audio/video equipment. For help with your cable connections, see
the Start Here booklet and the Installation Guide.
I can’t select an alternate audio track.
• Secondary audio programs (SAP) are not available for all programs. If you set the SAP
as the default audio, programs that have SAP will use it. Only one audio track is saved
with recorded programs. If SAP is the default audio and a program you are recording
has an SAP, the SAP will be the recorded program’s only audio. You can set the
default audio on the Television Audio screen (from TiVo Central, select Messages &
Setup, then My Preferences, then Audio Options, then Television Audio).
• Recorded programs, such as those in Now Playing, always have only one audio track,
the one they were recorded with.
• You cannot change the audio track if you are watching a live program, but are not
caught up to live TV. Catch up to live TV by pressing the ADVANCE button.
Changing the audio program will clear the saved part of the program you are watching,
so you will only be able to rewind live TV to the point where you changed the audio
program.