HID OMNIKEY 5427 CK Keyboard Wedge User Guide - Manual (Page 18)

OMNIKEY Keyboard Wedge Configuration, 5x27-902, Rev D.0
Page 18 of 23 November 2013
HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly
restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and
are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement,
please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.
3.2 Example 2 – Reading MIFARE Card CSN
1. Go to the Keyboard Wedge tab and select the Card Data Selection tab.
2. From the Card Type drop-down menu, select MIFARE Classic.
3. Click the Enable MIFARE Classic check box.
4. Click the CSN checkbox.
5. Enter Start into the Pre-strokes text field, press .
6. Enter End into the Post-strokes text field, press .
Figure 6 – MIFARE Card CSN Example
7. Open a text editor and place the MIFARE 1k Sample card into the RFID field over the
antenna of the reader.
8. The Keyboard wedge enters into the editor the word Start followed by the CSN data
in hexadecimal format and the word End.
Example:
Start70c0ad38End