HID OMNIKEY 5427 CK Keyboard Wedge User Guide - Manual (Page 17)

OMNIKEY Keyboard Wedge Configuration, 5x27-902, Rev D.0
November 2013 Page 17 of 23
HID GLOBAL CONFIDENTIAL AND PROPRIETARY INFORMATION. Use and disclosure of this information is strictly
restricted by the terms of a non-disclosure agreement with HID Global Corporation. If you have received this information and
are not an intended recipient or are not subject to or do not agree to be bound by the terms of the non-disclosure agreement,
please immediately return this document to HID Global Corporation, 15370 Barranca Pkwy, Irvine, CA 92618-3106.
3 Card Configuration Examples
3.1 Example 1 – Reading iCLASS Card PACS Data
1. Enable Keyboard Wedge mode, see Figure 3 – Enabling Keyboard Wedge.
2. Select the Keyboard Wedge tab and select the Card Data Selection tab.
3. From the Card Type drop-down menu, select HID iCLASS.
4. Click the Enable HID iCLASS check box.
5. Click the PACS checkbox.
6. In the PACS Pre-strokes text field, enter Start.
7. Press
Figure 5 – iCLASS Card PACS Data Example
8. Open a text editor and place the iCLASS Sample card into the RFID field over the
antenna of the reader.
9. The Keyboard Wedge enters into the editor the word Start followed by the PACS
data in hexadecimal format. Example:
Startf6e1b500f9ff12e0