HID EDGE Solo v120 User Guide - Manual (Page 18)

Schedules
14
Modify the door unlock feature by enabling On-site Rule. The On-site Rule ensures that at least
one authorized person has been granted access within the defined time period, otherwise, the
door will not unlock. The time period is set between 0 and 60 minutes before the schedule start
time. Setting the time to 0 means that the door will not unlock until an authorized person has been
granted access AFTER the start time of the door unlock schedule.
NOTE: The door will unlock according to the defined schedule regardless of unforeseen circum-
stances, if the On-site Rule is not enabled.
To set up the door unlock schedule:
1. Click the Door Unlock Schedule text link.
• The Door Unlock Schedule page displays.
2. Enable the On-site Rule with the appropriate radio button option.
• Disabling the On-site Rule will unlock the door based on the schedule only.
3. Enter the On-site time period between 0 and 60 minutes.
4. Choose Existing Schedule or Click Add Schedule.
5. Click Save.
• The door will now unlock and relock automatically based on this schedule.
Setting Up and Editing the Card Only Schedule
If needed, you can set up a schedule to require a person to only present a card. During the card
only schedule a person will not be required to enter a PIN to gain access. This option will not
appear unless a card with PIN reader has been installed.
NOTE: The Card Only Schedule applies to Card with PIN readers only.
To set up the card only schedule:
1. Click the Card Only Schedule text link.
• The Card Only Schedule page displays.
2. Choose Existing Schedule or Click Add Schedule.
3. Click Save.
• The card only schedule is now configured.