Firewall, Contact information – HID VertX EVO V1000 Installation Guide User Manual
Page 14
VertX EVO V1000 Installation Guide
Firewall
If the VertX controller is being installed where it communicates through a firewall, then the firewall may need to be
configured to allow TCP data transfer on the specified port(s).
1. Before starting, ensure that any pop-up blocker software is disabled on the computer.
2. Open the following ports on the firewall.
connection_port (4070)
TCP outbound. This port must be open on the Host computer.
listen_port (4050)
TCP incoming. This port must be open when using selected applications.
If you are not familiar with configuring a firewall for a network, contact the Network/IT administrator or manager.
CAUTION: If the firewall is not configured properly the controller may not communicate with the host.
Contact Information
Americas
HID Global (California, USA)
support:
support.hidglobal.com
sales:
main:
949 732 2000
sales:
800 210 4744
telephone:
800 237 7769
fax number: 949 732 2120
Europe, Middle East and Africa
HID Corporation, Ltd. (Haverhill, UK)
support:
support.hidglobal.com
sales:
telephone:
+44 1440 714 850
fax number: +44 1440 714 840
Asia-Pacific
HID Asia Pacific Ltd. (Hong Kong)
support:
support.hidglobal.com
sales:
telephone:
(852) 3160 9800
fax number: (852) 3160 4809
July 2011
Page 14 of 19
© 2003 - 2011 HID Global Corporation. All rights reserved.