Nikon 880 - Manual (Page 60)

55
P 1/60 F2.8
NORMAL NORMAL
[ 10 ]
Throwing Light on Your Subject: The Flash Button
The flash can be adjusted for a variety of shooting situations, as described on the following pages.
To change the flash setting, press the button, located above the monitor on the back of the
camera.
1 2
Press Confirm flash setting in
control panel or monitor
(setting not displayed in
monitor when flash set to
“auto”)
A short pause is required between exposures for the flash system to charge. While the flash is charging,
the red flash lamp next to the viewfinder will blink when the shutter-release button is pressed halfway.
Try again after briefly removing your finger from the shutter-release button.