Nikon COOLPIX-S8100 - Manual (Page 183)

171
Setup Menu
Basi
c Came
ra Setup
Auto Off
If no operations are performed for a specified amount of time, the monitor turns
off and the camera enters standby mode (
A 17).
Choose the time allowed to elapse before the camera enters standby mode from
30 s, 1 min (default setting), 5 min, and 30 min.
d button M z (Setup menu) (A 158) M Auto off
C
When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for another three minutes, the camera will turn off automatically.
• When the power-on lamp is blinking, the following operations will turn the monitor back on.
- Pressing the power switch, shutter-release button, c button, or b (movie-record) button.
- Rotating the mode dial.
C
Auto Off
The time allowed to elapse before the camera enters standby mode is fixed in the following
situations:
• While menus are displayed: 3 minutes
• During slide show playback: up to 30 minutes
• When the AC adapter EH-62F is connected: 30 minutes