Vibration reduction, A 166, A 166) to – Nikon COOLPIX-S8100 User Manual
Page 178: A 166), A 166) i, A 166) is ena, A 166) t
166
Setup Menu
Basi
c Came
ra Setup
Vibration Reduction
Choose a vibration reduction option for shooting.
Vibration reduction effectively reduces blur, caused by slight hand movement
known as camera shake, which commonly occurs when shooting with zoom
applied or at slow shutter speeds. The effects of camera shake are reduced when
recording movies, in addition to when taking still pictures.
Set
Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
The current vibration reduction setting can be confirmed in the camera monitor
with shooting (
A 6, 23). When
Off is selected, no icon is displayed.
d button M z (Setup menu) (A 158) M Vibration reduction
V
On (hybrid)
The effects of camera shake are corrected optically using a lens shift method, and
electronic vibration reduction is used to process still images that are captured in the
following situations.
• When the flash does not fire
• When the shutter speed is slower than 1/60 seconds.
• When
Self-timer is set to Off
• When ISO sensitivity is 200 or lower
g
On (default setting)
The effects of camera shake are corrected using a lens shift method.
Camera automatically detects the panning direction and only corrects for vibration
due to camera shake. When the camera is panned, for example, vibration reduction
reduces only vertical shake. If the camera is tilted, vibration reduction affects only
horizontal shake.
k Off
Vibration reduction is not enabled.