Nikon D100 User Manual
Page 90
Taking Photographs—Exposur
e
Exposure
78
Flexible Program
In auto multi program, you can rotate the main com-
mand dial to choose different combinations of shutter
speed and aperture (“flexible program”), each of which
will produce the same exposure. While flexible program
is in effect, appears in the control panel. To restore
default shutter speed and aperture settings, rotate the
main command dial until the indicator is no longer dis-
played. Default settings can also be restored by turning
the camera off, selecting another exposure mode, rais-
ing the built-in Speedlight (
98), or performing a two-
button reset (
110).
To take photographs in auto multi program, simply:
1
Rotate the function dial to P.
2
Frame a photograph and shoot.
Exposure Warning
If the limits of the exposure metering system are exceeded, one of the following indica-
tors will be displayed in the control panel and viewfinder:
Indicator
Description
Subject too bright. Use a Neutral Density (ND) filter or lower sensitivity
(ISO equivalency;
48).
Subject too dark. Use the flash (
98) or raise sensitivity (ISO equiva-
lency).