Nikon D100 - Manual (Page 27)

15
Intr
oduction—First Steps
Step 1—Attach the Camera Strap
Attach the camera strap securely to the two eyelets on the camera body as
shown below.
1
The Monitor Cover
A clear plastic cover (the BM-2 LCD monitor cover) is
provided with the camera to keep the monitor clean,
and to protect the monitor when the camera is not in
use or when you are transporting the camera. To re-
move the monitor cover, hold the camera firmly and pull
the bottom of the cover gently outwards as shown at
right (1). Once the cover is unlatched, you can move it
slightly away from the monitor (2) and then remove it as
shown (3).
To replace the cover for shooting or storage, insert the
two projections on the top of the cover into the match-
ing indentations above the camera monitor (1), then
press the bottom of the cover until you hear it click into
place (2).
Do not lift bottom of cover
past point shown