V. add-on components – Swiftech H20 120 PREMIUM User Manual

Page 26

http://www.swiftnets.com

Rouchon Industries, Inc., dba Swiftech – 1703 E. 28

Street, Signal Hill, CA 90755 – Tel. 562-595-8009 – Fax 562-595-8769 - E Mail: [email protected]

PAGE 26 of 26

V. Add-on components

Improve performance with a second radiator:

MCR120-FK Radiator assembly

Part # MCR120-FK, includes radiator, 120mm fan

and mounting screws

Cool your graphics card with the MCW55 VGA water-block.

Go to:

http://www.swiftnets.com/products/mcw55.asp

for

specifications

Part # MCW55

Add a second

Apogee

water block for multiprocessor

applications, such as dual AMD®, dual Xeon™, or dual
Opteron™

For Dual Xeon “Nocona” users do not forget to add the

optional Nocona hardware (part AP-NC604) when you

purchase your second Apogee water-block. In effect, while this

hardware is included in this kit, it is not included when the

Apogee water-block is sold separately.

Cool the chipset with the

MCW30

chipset cooler

When heat loads are not “out of control” air-cooling does the job just fine.

Check out the heavy-duty air-cooled solutions below for your chipset and graphics memory.

Cool your chipset with the MCX159-CU whisper-quiet

heatsink.

Go to

http://www.swiftnets.com/products/mcx159-CU.asp

for

specifications

Part # MCX159-CU

Cool you graphics memory chips with the MC14 BGA heatsinks

Go to:

http://www.swiftnets.com/products/MC14.asp

Part # MC14

TV500 Drain assembly

1/2" (Tube OD) Flush Assembly, including 1/2" Tube quick-

connect T, and 1/2" quick-connect ball valve. A useful

accessory for users who empty their system often. Can also be

used as a fill T (without reservoir).