Equipment description – Blodgett SN-E Series User Manual
Page 5
OM-SN-E 3
Your 3-pan or 5-pan atmospheric convection steamer is designed to give years
of service. It has a stainless steel cavity (cooking chamber) which is served by an
independent atmospheric steam generator which is electricallyheated. A powerful
blower circulates the steam in the cavity to increase heating efficiency.
The cavity holds up to five or three steam table pans (12” x 20” x 2½” deep). An 18
gauge stainless steel case encloses the cavity, the steam generator and the control
compartment that houses electrical components. Door hinges are reversible (the door
may be set to open from the left or right). Operating Controls are on the front panel.
The steamers are equipped with fully electronic controls and a button-activated,
preprogrammed CLEAN cycle. These units are readily identified by their unique control
panels. The On-Off switch is operated by touch pad controls, and the distinctive
symbol for steam is integrated into the panel. The new models also have fewer panel
louvers on the right side.
From the rear the units are distinguished by the addition of a fuse box, which lets
operators change fuses without removing panels.
The drain system on all models includes a spray condenser, which helps keep steam
from escaping from the chamber and cools drain water.
Equipment Description
The 3-pan steamer holds three standard
12” x 20” x 2½” steamer pans.
The 5-pan steamer holds up to five pans.