Cleaning – Blodgett SN-E Series User Manual

Page 14

OM-SN-E

Cleaning

C. Deliming Instructions (Use Touch Pad)

STEP 1 - Press ON/OFF to turn steamer off. Open door.

STEP 2 - Let cavity cool for 5 minutes or longer. While cool, wipe out cavity.

Close door.

STEP 3 - Press and hold CLEAN while also turning steamer on by pressing ON/

OFF, until only DELIME and POWER lights remain on (all lights will turn on, then

off, except DELIME and POWER).

STEP 4- After 5 minutes, beeper will beep rapidly, signaling you to add Delimer/

Descaler. Door(s) must remain closed for entire delime cycle.

STEP 5- Pour 1 pint (2 cups) of delimer PER CAVITY into upper and /or lower de-

liming port(s) and then close port(s). Press CLEAN. Double-stacked unit cavities

may be delimed together or separately.

STEP 6- Delime cycle will start, taking about 30 minutes. When delime cycle is

complete, DELIME light will appear, DONE light will flash and beeper will beep.

STEP 7- Press ON/OFF to turn steamer off. Let cavity cool for 5 minutes or lon-

ger. Open door, wipe out inside of cavity and wipe door gasket. Close door.

STEP 8- To use steamer, press ON/OFF. When READY light appears, steamer is

ready to use.

NOTES:

If DELIME light flashes rapidly (5 times per second), press CLEAN to restart

delime cycle.

b. If power outage occurs during deliming, delime cycle must be restarted.

Press CLEAN.

For best performance, do not interrupt delime cycle. If delime cycle must

be stopped, press ON/OFF to turn on. Set timer for 5 minutes. After beeper

beeps, press ON/OFF to turn off. Let cavity cool for 5 minutes or longer,

carefully open door(s) and wipe out cavity completely.