Appendix b, Switch default settings – Allied Telesis AT-8288XL/SC User Manual
Page 55

55
Appendix B
Switch Default Settings
This appendix lists the switch’s factory default software settings.
Settings
Default
IP Address
0.0.0.0
Subnet Mask
0.0.0.0
Gateway Address
0.0.0.0
Get Community String
public
Set Community String
private
Trap Community String
public
Spanning Tree Protocol
Disabled
Bridge Priority
32768
Bridge Max Age Time
20
Bridge Hello Time
2
Bridge Forwarding Delay
15
Telnet Access
Enabled
System Name
None
Omega Password
No password assigned
Omega Time Out Value
5 minutes
Download Password
ATS24
Duplex Mode 10/100Base-TX Ports
Auto-negotiating
Duplex Mode 100Base-FX Ports
Full-duplex
Active Aging Time (MAC Address Table)
300 seconds
High Port Speed
Auto-negotiating
Domain Name
None
VLAN Name
Default VLAN (all ports)
PVID/VID 1
This manual is related to the following products: