Allied Telesis AT-8116 - Manual (Page 85)

AT-8116 User’s Guide
C-3
Table C-3 IP Commands
get-ip Show current IP address
set-ip Set IP address
get-ip-cfg Show current IP configuration
set-ip-cfg Set IP address, netmask and broadcast
clear-ip-cfg Clear IP configuration in NVRAM
get-gatew Show default gateway
set-gatew Define default gateway
get-arp-tbl Display the ARP Table
del-arp-entry Deletes an entry/all entries (*) of the ARP table
add-arp-entry Adds an entry to the ARP table
ping IP traffic generator
ping-stop Stop the ping process
Table C-4 SNMP Commands
get-comm Show current read and /or write community
set-comm Change the read or write community
get-auth Shows the traps authentication mode
set-auth Sets the trap authentication mode
get-traps Show destination stations in the trap list
add-trap Add destination station to trap list
del-trap Delete a destination station from trap list
get-rmon-state Display the RMON session state