beautypg.com

Set-prt-prio, Set-prt-enb, Set-prt-pcost – Allied Telesis AT-8116 User Manual

Page 71

background image

AT-8116 User’s Guide

14-3

set-prt-prio

This command sets the Spanning Tree port priority. port_number is
the decimal port number, and port_priority is an integer in the range
1..255.

set-prt-prio

set-prt-enb

set-prt-enb {enable|disable}

This command enables or disables a port in the Spanning Tree.
port_number is the integer port number.

set-prt-pcost

set-prt-pcost

This command sets the Spanning Tree port path cost. port_number
is the integer port number, and path_cost is an integer path cost in
the range 1..65535.

See also other documents in the category Allied Telesis Computer hardware: