Allied Telesis AT-8116 - Manual (Page 14)

Command Line Interface
2-4
When, as a result of a command, more than one screen-full of text is
to be printed, the user may continue to scroll or stop the process.
SYS_console>system
System Commands
Table 2-1 System Commands
sys-stat show system status
get-stst-level show the selftest level
set-stst-level change the selftest level
warm-reset warm reset of the device
cold-reset cold reset of the device
get-last-err displays information about the last fatal error
init-nvram initialize NVRAM to default values
get-sw-file retrieves the SNMP Agent Software file name
set-sw-file sets the SNMP Agent Software file name - for download
get-tftp-srvr retrieves the TFTP download server IP address
set-tftp-srvr sets the TFTP download server IP address
set-tftp-mode sets the TFTP download mode
get-tftp-mode retrieves the TFTP download mode
sw-dnld software download BY TFTP
set-fg-param sets the Ethernet frame generator parameters
start-fg starts the Ethernet frame generator
stop-fg stop the Ethernet frame generator