Chapter5, Ip commands, Get-ip – Allied Telesis AT-8116 User Manual

Page 27: Set-ip, Chapter 5

Text mode
Original mode

5-1

Chapter 5

IP Commands

This section lists the IP Configuration commands available to the
command line interface. It is separated into different sections to
allow simpler lookup: IP Configuration lists general configuration
commands, Ping lists commands pertaining to the ping ability of the
Agent, Address Resolution Protocol lists ARP-related information.

get-ip

This command shows the device’s current IP address, if any.

If the IP Config has already been defined

SYS_console>get-ip

--IP Config already defined

The device IP address is: 194.090.136.187.

If the device has no IP Address defined.

SYS_console> _

SYS_console>get-ip

-- No IP Config defined

SYS_console>

set-ip