Get-gatew, Set-gatew – Allied Telesis AT-8116 User Manual

Page 30

Text mode
Original mode

IP Commands

5-4

get-gatew

Shows default gateway. This command shows which default route
will be used to access a different IP network.

SYS_console>get-gatew

The default gateway address is:
194.090.136.254

SYS_console>

set-gatew

Sets the default gateway IP Address. This command lets you specify
the address of the router used to access a different IP for network
management packets or Ping. However, if not set, then all packets
remain in the local network. The default value for the default
gateway IP address is 0.0.0.0.

set-gatew

SYS_console>set-gatew 194.90.136.254

Device Default Gateway change in the NVRAM OK

Device Default Gateway changed to:
194.90.136.254

SYS_console>