Allied Telesis AT-8550 - Manual (Page 8)

VLAN Commands
6
enable ignore-stp vlan Enables a VLAN from using STP port information. When enabled, all
virtual ports associated with the VLAN are in STP forwarding mode.
The default setting is disabled.
show gvrp Displays the current configuration and status of GVRP.
show protocol { | all} Displays protocol-related information.
show vlan { | all>} When used with the keyword all , or with no named VLANs,
displays a summary list of VLAN names with a portlist and
associated status of each. When used with a named identifier,
displays port information, including membership list, IP address, and
tag information.
unconfig vlan ipaddress Resets the IP address of the VLAN.
Command Description