Allied Telesis AT-8550 - Manual (Page 3)

1
Gigabit Switch User’s Command
Guide
General Switch Commands
Command Description
clear counters Clears all switch statistics and port counters.
config account {encrypted}
{} Configures a user account password. Passwords must have a
minimum of 4 characters and can have a maximum of 12 characters.
User names and passwords are case-sensitive.
config banner Configures the banner string. You can enter up to 24 rows of 80-
column text that is displayed before the login prompt of each
session. Press [Return] at the beginning of a line to terminate the
command and apply the banner. To clear the banner, press [Return]
at the beginning of the first line.
config time Configures the system date and time. The format is as follows:
mm/dd/yyyy hh:mm:ss
The time uses a 24-hour clock format. You cannot set the year past
2023.
config timezone {autodst |
noautodst} Configures the GMT offset and usage of Daylight Savings.The
GMT_OFFSET is in +/- minutes from the GMT time. Automatic
Daylight Savings Time (DST) changes can be enabled or disabled.
The default setting is enabled.
create account [admin | user]
{encrypted} {} Creates a user account. The encrypted option should only be
used by the switch to generate an ASCII configuration (using the
upload configuration command), and parsing a switch-
generated configuration (using the download configuration
command).
delete account Deletes a user account.
disable pace Disables recognition of the PACE bit. Available only in ingress mode.
enable license [basic_L3 | advanced_L3]
Enables a particular software feature license. Specify
as an integer. This command is available only on
the AT-8550 and AT-8525.
The command
unconfig switch all does not clear licensing
information. This feature cannot be disabled once the license is
enabled on the switch.