Allied Telesis AT-8550 - Manual (Page 31)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide
29
PIM-DM Commands
Command Description
config pim-dm add vlan [ | all] Enables PIM-DM on an IP interface. When an IP interface is created,
per-interface PIM-DM configuration is disabled by default.
config pim-dm delete vlan [ | all] Disables PIM-DM on an interface.
config pim-dm timer Configures the global PIM-DM timers. Specify the following:
❑ hello_interval — The amount of time before a hello
message is sent out by the PIM-DM router. The range is 1 to
65,519 seconds. The default setting is 30 seconds.
config pim-dm vlan [ | all] trusted-
gateway [ | none] Configures PIM-DM to use the access profile to determine which
PIM-DM neighbor is to receive or reject the routes.
disable pim-dm Disables PIM-DM on the system.
enable pim-dm Enables PIM-DM on the system. The default setting is disabled.
show pim-dm {vlan } Displays the PIM-DM configuration and statistics. If no VLAN is
specified, the configuration is displayed for all PIM-DM interfaces.
unconfig pim-dm {vlan } Resets all PIM-DM settings to their default values.