Allied Telesis AT-8550 - Manual (Page 27)

AT-9108, AT-8518, AT-8525, and AT-8550 User’s Command Guide
25
delete ospf area [ | all] Deletes and OSPF area. Once an OSPF area is removed, the
associated OSPF area and OSPF interface information is removed.
disable ospf Disables OSPF.
disable ospf export rip Disables exporting of RIP routes to other OSPF routers.
disable ospf export static Disables exporting of statically configured routes.
enable ospf Enables OSPF process for the router.
enable ospf export rip cost {} [ase-
type-1 | ase-type-2] {tag } Enables the distribution of RIP routes into the OSPF domain. The
default tag number is 0. The default setting is disabled.
enable ospf export static cost {} [ase-
type-1 | ase-type-2] {tag } Enables the distribution of static routes into the OSPF domain. The
default tag number is 0. The default setting is disabled.
show ospf Displays global OSPF information.
show ospf area {} Displays information about a particular OSPF area, or all OSPF areas.
show ospf interfaces {vlan | area
} Displays information about one or all OSPF interfaces. If no
argument is specified, all OSPF interfaces are displayed.
show ospf lsdb {detail} area [ | all]
[router | network | summary-net | summary-
asb | as-external | external-type7 |all] Displays a table of the current LSDB. You can filter the display using
either the area ID, the remote router ID, or the link-state ID. The
default setting is
all with no detail. If detail is specified, each
entry includes complete LSA information.
show ospf virtual-link { } Displays virtual link information about a particular router or all
routers.
unconfig ospf {vlan | area } Resets one or all OSPF interfaces to the default settings.
Command Description