Allied Telesis AT-S63 - Manual (Page 378)

Chapter 28: Encryption Key Commands
378
CREATE ENCO KEY
Syntax 1
create enco key= key-id type=rsa length= value
[description=" description "]
Syntax 2
create enco key= key-id type=rsa [description=" description "]
[file= filename .key] [format=hex|ssh|ssh2]
Parameters
key Specifies a key ID. The range is 0 to 65,535. The
default is 0. When creating a new key this value must
be unique from all other key IDs on the switch.
type Specifies the type of key, which can only be a
random RSA key.
length Specifies the length of the key in bits. The range is
512 to 1536 bits, in increments of 256 bits (for
example, 512, 768, 1024, etc). The default is 512 bits.
This parameter is only used when creating a new
encryption key pair.
description Specifies a description for the encryption key. The
description can be up to 40 alphanumeric
characters. Spaces are allowed. The description must
be enclosed in quotes. This parameter, which is
optional, is used when creating a new key pair and
when importing a public key from the AT-S63 file
system to the key database. This parameter should
not be used when exporting a public key to the file
system.
file Specifies a filename for the key. The filename must
include the “.key” extension. This parameter is used
when you are importing or exporting a public key
from the key database. This parameter is not used
when creating a new encryption key pair.
format Specifies the format when importing or exporting a
public encryption key. The options are: