Allied Telesis AT-S63 - Manual (Page 114)

Chapter 7: Port Parameter Commands
114
fctrllimit Specifies the number of cells for flow control. A cell
represents 64 bytes. The range is 1 to 57,344 cells.
The default value is 8192 cells.
backpressure Controls back pressure on the port. Back pressure
applies only to ports operating in half-duplex mode.
The options are:
yes, on, true, enabled Activates back pressure on
the port. These options are
equivalent.
no, off, false, disabled Deactivates back pressure
on the port. This is the
default. These options are
equivalent.
bplimit Specifies the number of cells for back pressure. A
cell represents 64 bytes. The range is 1 to 57,344
cells. The default value is 8192 cells.
bcastfiltering Controls the broadcast filter. The options are:
yes, on, true, enabled The port forwards broadcast
frames. These options are
equivalent.
no, off, false, disabled The port discards all ingress
broadcast frames. These
options are equivalent.
unkmcastfiltering Controls the unknown multicast filter. The options
are:
yes, on, true, enabled The port forwards unknown
multicast frames. These
options are equivalent.
no, off, false, disabled The port discards all
unknown multicast frames.
These options are
equivalent.
unkucastfiltering Controls the unknown unicast filter. The options are:
yes, on, true, enabled The port forwards unknown
unicast frames. These
options are equivalent.