Allied Telesis AT-S63 - Manual (Page 155)

AT-S63 Management Software Command Line Interface User’s Guide
155
srcfile Specifies the filename of the file you are
file downloading onto the switch. The parameter is
required for a TFTP download.
switchlist Specifies the switches in an enhanced stack to which
to download the software image or file from the
master switch. To view the switches in an enhanced
stack, see “SHOW REMOTELIST” on page 102. This
parameter is used with the REMOTESWITCH
parameter. You can specify more than one switch at
a time (for example, 1,3,4). This option can only be
used from a local or remote management session of
a master switch.
verbose Specifies whether to display details of the download
operation. This option can only be used with the
REMOTESWITCH download method. The options
are:
yes, on, true Display the download details. The
options are equivalent.
no, off, false Do not display the download
details. The options are equivalent.
Description
You can use this command to download a new version of the AT-S63
management software onto a switch.
You can also use this command to download any of the following types
of files into a switch’s file system:
❑ Configuration file
❑ Public key certificate
❑ Public key certificate enrollment request
❑ Encryption key
This command can download files as follows:
❑ From a management station to a slave or master switch using
Xmodem or TFTP.
❑ From a master switch to other switches in an enhanced stack.