Allied Telesis AT-S63 - Manual (Page 160)

Chapter 12: File Download and Upload Commands
160
UPLOAD
Syntax
upload method=tftp|xmodem destfile= filename server= ipaddress
file= filename
Parameter s
method Specifies the method of the upload. The options are:
tftp Specifies a TFTP upload. To use
this option, there must be TFTP
server software on a network
node. You can use this option
from either a local or Telnet
management session.
xmodem Indicates that the upload will be
performed using Xmodem. This
option is supported only from a
local management session.
destfile Specifies a filename for the file when saved on the
TFTP server. If the name contains spaces, enclose the
name in quotes. This parameter is used with a TFTP
upload.
server Specifies the IP address of the network node
containing the TFTP server software. This parameter
is used with a TFTP upload.
file Specifies the name of the file you are uploading from
the switch. If the name contains spaces, enclose the
name in quotes.
Description
This command can upload any of the following types of files from a
switch to a management station or TFTP server:
❑ AT-S63 software image
❑ Configuration file
❑ Public key certificate
❑ Public key certificate enrollment request