Allied Telesis AT-S88 - Manual (Page 97)

AT-S88 Management Software User’s Guide
89
Specifying the Scheduling Algorithm
To change the scheduling algorithm, perform the following procedure.
1. From the main menu, select Bridge > COS.
The CoS page is shown in Figure 29 on page 88.
2. In the Scheduling Algorithm list, select the algorithm, one of the
following:
Strict
The port transmits all packets out of higher priority queues before
transmitting any from the lower priority queues.
WRR (Weighted Round Robin)
The port transmits a set number of packets from each queue, in a
round robin fashion, so that each has a chance to transmit traffic. See
Table 3 on page 85 for the factory default values.
3. Do one of the following:
ˆ Click OK to save the changes.
ˆ Click Reload to clear the changes and start over.
4. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 13.
5. Click Save.