Allied Telesis AT-S88 - Manual (Page 85)

AT-S88 Management Software User’s Guide
77
ˆ Click twice to assign the port as an untagged member of the VLAN.
A “U” is placed on that port
ˆ Click Detach All to remove all the ports from the VLAN and start
over.
4. Do one of the following:
ˆ Click OK to save the changes.
ˆ Click Reload to reload any previous settings for the VLAN.
5. To permanently save these settings in the configuration file, from the
main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3 on page 13.
6. Click Save.
Viewing a Tagged
VLAN
To view a tagged VLAN, perform the following procedure:
1. From the main menu, select Bridge > VLAN > Tagged VLAN.
The Tagged VLAN page is shown in Figure 24 on page 74.
2. In the Show VLAN list, select the VLAN you want to view.
The graphic image of the switch is updated to show the ports that are
included in this VLAN.