Allied Telesis AT-S88 - Manual (Page 121)

AT-S88 Management Software User’s Guide
113
The Port Access Control page is shown in Figure 36.
Figure 36. Port Access Control Page
2. In the Reauthentication list, choose one of the following:
Enable
Enables reauthentication on the switch.
Disable
Disables reauthentication. The default is Disable.
3. In the Authentication Method list, choose one of the following:
Local
Stores the authentication database on the switch.
RADIUS
Uses a remote RADIUS server for authentication. To set up the
RADIUS server, refer to “RADIUS” on page 121.
4. In the Reauthentication Time field, enter a number for how often
authentication is performed. The default value is 3600, and the range
is 1 to 4294967295 seconds.
5. In the Retransmission Time field, enter a number for how often the
authentication is transmitted. The default value is 30 seconds, and the
range is 1 to 65,535 seconds.