Allied Telesis AT-S88 - Manual (Page 21)

AT-S88 Management Software User’s Guide
13
7. Log into the switch using its new IP address.
8. From the main menu, select Save Configuration.
The Save Configuration page is shown in Figure 3.
Figure 3. Save Configuration Page
Note
If you do not save your changes, they are discarded when you
reboot the switch.
9. Click Save.
For information about DHCP, see “Enabling or Disabling DHCP” on
page 14.
Warning
Be sure to record the switch’s IP address in a safe place. When you
change the switch’s IP address you lose your connection. Because
the switch does not have a console port, your only means of
managing the switch is through a web browser, which requires that
you have the switch’s IP address.