Allied Telesis AT-S88 - Manual (Page 82)

Chapter 8: VLANs
74
Creating a Tagged VLAN
This section contains the following procedures:
ˆ “Creating a Tagged VLAN”, next
ˆ “Modifying a Tagged VLAN” on page 76
ˆ “Viewing a Tagged VLAN” on page 77
The switch’s default setting is for all ports to be untagged members of the
default VLAN (VLAN ID 1).
Creating a
Tagged VLAN
To create a tagged VLAN, perform the following procedure:
1. From the main menu, select Bridge > VLAN > Tagged VLAN.
The Tagged VLAN page is shown in Figure 24.This page shows the
default tagged VLAN, with all ports identified as untagged ports.
Figure 24. Tagged VLAN Page
2. In the Show VLAN list, select Add a new VLAN.