Allied Telesis AT-S88 - Manual (Page 31)

AT-S88 Management Software User’s Guide
23
Rebooting the Switch
Note
The reboot process stops network traffic and you lose your
connection to the switch.
This process also discards any configuration changes that you have
not permanently saved.
To permanently save any configuration changes, from the main
menu, select Save Configuration, and click Save before
proceeding.
To reboot the switch, perform the following procedure:
1. From the main menu, select System > Reboot.
The Reboot page is shown in Figure 7.
Figure 7. Reboot Page
2. Click Reboot.