beautypg.com

Creating a port trunk, From the main menu, select bridge > trunking – Allied Telesis AT-S88 User Manual

Page 62

background image

Chapter 6: Port Trunking

54

Creating a Port Trunk

To create a port trunk, perform the following procedure:

1. From the main menu, select Bridge > Trunking.

The Trunking page is shown in Figure 17.

Figure 17. Trunking Page

2. In the Show Trunk list, select Add a New Trunk.

3. In the Name field, type a name for the trunk.

4. In the Trunk ID field, choose a number for the trunk ID, from 1 to 10.

5. Select the ports you want to include in the trunk by clicking the port

icon in the graphic image of the switch front.

A check mark is placed for each port you select, as for example
Figure 18.

Figure 18. Trunk Ports Selected

You can select up to a maximum of 8 ports for each trunk which must
all be within the same VLAN.