Allied Telesis AT-8000GS/48 - Manual (Page 31)

AT-8000GS Series Gigabit Ethernet Switch Installation Guide
31
clip to a metal surface to act as ground. An ESD strap is not supplied
with the device.
2. Place the container on a clean flat surface and cut all straps securing
the container.
3. Open the container.
4. Carefully remove the device from the container and place it on a
secure and clean surface.
5. Remove all packing material.
6. Inspect the product for damage. Report any damage immediately.
If any item is found missing or damaged, please contact your local Allied
Telesis reseller for a replacement.