Allied Telesis AT-8000GS/48 - Manual (Page 12)

Chapter 1: Overview
12
Model Descriptions
AT-8000GS/24
The following figure illustrates the AT-8000GS/24 front panel.
Figure 1 AT-8000GS/24 Gigabit Ethernet Switch Front Panel
The AT-8000GS/24 front panel is configured as follows:
ˆ 24 10/100/1000Mbps ports — RJ-45 ports designated as 10/100/
1000Base-T. The RJ-45 ports are designated as Ports 1-24.
ˆ 4 SFP Ports — There are four 1000Base-X SFP combo ports. These
ports are associated with the RJ-45 copper ports: 21, 22, 23 and 24.
ˆ Select Button — Selects the port LED indications.
The following figure illustrates the AT-8000GS/24 back panel.
Figure 2 AT-8000GS/24 Gigabit Ethernet Switch Back Panel
The AT-8000GS/24 back panel is configured as follows:
ˆ Power Connector — AC power supply interface.
ˆ 2 Stacking Ports — Two HDMI connector stacking ports .
ˆ Console Port — An RJ-45 connector supporting the RS-232 electrical
specification.
ˆ Reset Button — Button to reset the device.
1336
SFP Ports
Mode
Button
Mode
LEDs
10/100/1000Base-T Ports
Power
LED
Stacking
LEDs
10/100/1000Base-T Ports 10/100/1000Base-T Ports LED
Diagnostic