Allied Telesis AT-8000GS/48 User Manual
Page 28
Chapter 2: Installation
28
Warning: To reduce the risk of electric shock, the ports on this
product must not connect to cabling that is routed outside the
building where this device is located.
E40
Caution: The unit does not contain serviceable components.
Please return damaged units for servicing.
Caution: The AT-8000gs/24POE Ethernet ports are only
intended for installation in Environment A as defined in IEEE
802.3af. All interconnected equipment must be contained in the
same building including the interconnected equipment’s
associated LAN connections.
Caution: The surface-mounted fuses F1 to F24 on the Power
over Ethernet daughter board in the AT-8000/24POE switch are
rated a minimum of 60V, max 1.5A. These fuses are not field-
replaceable and should only be serviced by a trained Allied
Telesis service technician.