Allied Telesis AT-x210-9GT - Manual (Page 51)

AT-x210-9GT, AT-x210-16GT, and AT-x210-24GT Switches Installation Guide
41
Powering On the Switch
To power on the AT-x210-24GT, AT-x210-16GT, or AT-x210-9GT switch,
perform the following procedure:
1. Plug the power cord into the AC power connector, as shown in
Figure 32 on the back of an AT-x210-16GT Switch.
Figure 32. Lifting the AC Power Cable Hook on an AT-x210-16GT Switch
2. Plug the power cord into the AC power connector as shown in
Figure 33 on the back of an AT-x210-16GT Switch.
Figure 33. Plugging in the AC Power Cord on an AT-x210-16GT Switch
3. Plug the other end of the power cord into a wall outlet.
Power cable hook
Power cable hook mount
Power cable