Allied Telesis AT-x210-9GT - Manual (Page 16)

Chapter 1: Overview
6
Features
Here are the hardware features of the AT-x210-9GT, AT-x210-16GT and
AT-x210-24GT Gigabit Ethernet Switches.
Twisted Pair
Ports
Here are the basic features of the 10/100/1000 Mbps twisted-pair ports:
„ 9, 16, or 24 ports per switch
„ 10Base-T (IEEE 802.3i), 100Base-TX (IEEE 802.3u) and
1000Base-T (IEEE 802.3ab) compliant
„ IEEE 802.3u Auto-Negotiation compliant
„ Auto-MDI/MDIX
„ 100 meters (328 feet) maximum operating distance
„ IEEE 802.3x Flow Control in 10Base-T/100Base-TX full-duplex
operation
„ IEEE 802.3x Back Pressure in 10Base-T/100Base-TX half-duplex
operation
„ IEEE803.3z 1000Base-T Flow Control
„ Support for Jumbo frames up to 10KB
„ RJ-45 connectors
SFP Slots All three switches support both 100Base-FX and 1000Base-SX/LX
transceivers. The switches support either two or four slots for SFPs:
„ One SFP slot on the AT-x210-9GT Switch
„ Two SFP slots on the AT-x210-16GT Switch
„ Four SFP slots on the AT-x210-24GT Switch
Note
You must purchase SFP transceivers separately. For a list of
supported transceivers, contact your Allied Telesis distributor or
reseller.
Note
See the product data sheets for the specific ATI SFP modules
supported by the AT-x210 series switches.